The printer certainly delivers on the second count, as all toner cartridges last for 8000 pages and you have a maintenance kit that’s good for 200,000 pages. Overall costs per A4 mono page pan out to 1.8c, while colour pushes this to 8c per page. Compare these costs with Samsung’s sub-$500 CLP-300, which sets you back 5.4c for a mono page and 25c for a colour page, and you can see where Kyocera is coming from.
The printer comes with an integral 500-sheet lower tray and you can add up to three more 500-sheet trays, along with an optional duplex unit. The printer is equipped with a decent 500MHz processor and the base memory can be upgraded to 640MB. Note that Kyocera wants around $150 for an extra 256MB 100-pin DIMM. Installing the printer is simple, as the routine hunts down the device on the network and offers the most appropriate drivers. The printer’s web interface is basic, but it does provide plenty of information about consumables, easy access to settings and options to send alerts via email.
To get colour print speeds up to a reasonable level, the C5025N uses a single-pass system, where the toner cartridges are laid out in a line down the paper path. Sure enough, the system worked fine, as our 24-page test DTP document with plenty of colour graphics and photographs was completed in 1min 11secs for 20ppm. Mono speeds were on the money as well, with a 20-page Word document churned out in 58 seconds. The printer’s top resolution is 600 x 600dpi, so there isn’t much to play with in the driver panel – select the top-quality setting or choose from a couple of toner-saving modes.
We found print quality to be disappointing overall. Text across a wide range of font sizes was sharp, and graphs and charts were delivered with no discernable banding. However, colour photos were lacklustre and a slight banding was noticeable in large areas comprising a single colour. The level of detail, particularly in darker areas, was good, but our test pictures lacked the vibrancy we’ve seen with Lexmark’s A-Listed C522n. Further investigation revealed reasonably smooth fills across colour fades, but grey shades composed of equal mixes of C, Y and M showed too much magenta.
The FS-C5025N scores highly for its speed and low running costs. Although the print quality makes it suited mainly to businesses looking for no more
than a splash of colour in reports, the fact remains that as a workhorse laser
it makes a good alternative to the A-Listed Lexmark.
A workgroup laser with a good turn of speed and low running costs, but we expect better quality at this price.
• Kyocera: www.kyoceramita.com.au
• Price: 1331 • Printing method: A4 colour laser • Max printing resolution: 600x600dpi • Fastest quoted print speed: Mono/Colour 22ppm • Processor speed: 500MHz • Processor type: PowerPC • RAM: 128MB • Ethernet: 10/100 • Tray capacity: 500 sheet • Extra tray size: 500 sheet • Extra tray price: 369 • OS support: Windows 98 or later • Warranty: 2 years on-site • Running costs|Cost per A4 page (mono): 1.8c • Running costs|Cost per A4 page (colour): 8c • Running costs|Mono cartrige price: $98 (8000 pages) • Running costs|Colour cartridge price: $166 (8000 pages) • Running costs|Extras: Maintenance kit $1199 (200,000 pages)