Emulators like Project64 let you try old-school games on your PC. Sure the graphics don't compare with today's blockbusters, but there's something about the gameplay that doesn't get old.
Here's how you do it:
[NOTE: a word of warning before you get started - as with any downloads, be sure to have up to date anti-virus, antispyware, and firewalls running before you go running around looking for ROMs.]1. Download the latest free (v1.6) Project64 emulator from the
binaries section of the Project64 site. You’ll also need a game ROM file or two, so use a search engine to look for N64 ROMs. Proceed with caution and run firewall, anti-virus and antispyware software, and prepare for pop-up hell.
2. Once installed, it’s time to configure Project 64. Choose Options | Configure Graphics Plug-In. First, set the resolution: any modern PC will handle 1,024 x 768 at 16-bit, so set this for the full-screen mode and windowed modes.
3. One of the pleasures of emulation is using modern hardware to make old graphics look slightly less rough and dated. Set Anisotropic filtering and Full-Scene Antialiasing to 4x and tick the first two checkboxes below. You can always adjust settings later if you experience performance issues.
4. Now you need to configure your controller (Options | Configure Input). You can use the keyboard or a joystick, but an analogue controller will make your experience more authentic. Select Controller (Gamepad) from the pull-down.
5. Calibrate the controller by clicking the button to the right of each input, then press the appropriate button or move the relevant pad/analogue stick in the correct direction. Finally, select Memory Pak from the pulldown, select Save Profile and save your setup.
6. Now to load a Nintendo game. Unzip your ROMs to an easily located folder, then select File | Open ROM and navigate your way there. Select the ROM file, click Open and the game in question will start.
